KEBA charging stations are certified by technical-scientific association VDE
KEBA charging stations are Z.E. READY, being certified by Renault
KEBA charging stations are certified by Nissan
KeContact P30  e-series, Type 2
Type 2
This charging station can charge electric vehicles with type 2 connector
This charging station comes with built-in cable 4 meters long

KeContact P30 e-series, Type 2

Charging station with integrated Type 2 cable, recommended for private use at home

  • Power: up to 4,6 kW
  • Size: 25 cm x 40 cm
  • Cable 4 meters long
  • Suitable for all Type 2 electric vehicles
  • Adjustable charging power supply
  • DC leakage detection
  • CE marking
  • Best for installation at home or in semi-public places, where Type 2 EVs usually charge
Additional options:

Final Price:


Advantages of KeContact e-series

KEBA KeContact P30 e-series, Type 2 has integrated cable. This makes charging very convenient for Type 2 EVs.

Charge time

KeContact e-series Type 2 can charge electric vehicles 30 km per hour (up to 4.6 kW), depending on the car's on-board charger. Only Type 2 EVs can charge with this model. Mostly, it takes 5-6 hours to charge such cars as Tesla, BMW i3, Huyndai Ioniq.

Safety and protection

KEBA housing cover is made of reliable, water-proof plastic, which protects the charging station from moisture, dust and all weather conditions. E-series has CE marking

Optimal use

KEBA KeContact P30 e-series is suitable for private use at home or in places with limited energy supply, and where Type 2 EVs usually charge

Chargers reliability

Suiatble for

Electric cars100% electric

BMW i3

Hyundai IONIQ Elektro

Mercedes-Benz B-Klasse Electric Driv

Renault Fluence Z.E. (Typ 2)

Renault Kangoo Z.E. (Typ 2)

Renault ZOE

Smart Fortwo electric drive (Type 2)

Tesla Model S

Tesla Model X

Tesla Model 3

VW e-up!

VW e-Golf

Volvo C30 Electric

Plug-in hybridsPlug-in hybrids

Audi A3 Sportback e-tron

Audi Q7 e-tron quattro

BMW i8

BMW 225xe Active Tourer

BMW 330e Limousine

BMW X5 eDrive40e

Mercedes-Benz C-Klasse C 350 e

Mercedes-Benz GLE 500 e

Mercedes-Benz S-Klasse Plug-in-Hybrid

Porsche Cayenne S E-Hybrid

Porsche Panamera S E-Hybrid


VW Passat Limousine GTE

Volvo V60 Plug-In Hybrid

Volvo XC90 Plug-In Hybrid

Comparison chargers

- Included - Available as an option - Not available


Single phase up to 20A (4.6kW). CE marking.


Three phase up to 32A (22kW). VDE marking.


Three phase up to 32A (22kW). VDE marking.


Three phase up to 32A (22kW). VDE marking.
VDE certified
Certifications: Renault ZE Ready, Nissan EV Ready
Cable, Type 1
Cable, Type 2
Single phase up to 20A (4.6kW)
Three phase up to 32A (22kW)
10A, 13A, 16A, 20A
25A, 32A
DC leakage detection
MID certified meter
GSM interface
Key switch authorization
RFID authentication
Customizing/branding stand
Charging power 4.6 kW Nominal current (configurable connection values) 10A, 13A, 16A, 20A (individual setup)
Mains voltage 230V Size 240 х 495 х 163 mm (H,W,D)
Weight 5 kg Colour Light grey (RAL7035) & black (RAL9005)
Installation Charging station can be installed on a wall or on a stand, which can be bought as an option Plug type Type 2 (in acc. with ICE 62196-2)
Protection IP54, waterproof, suitable for outdoor use Operating temperature, relative humidity -25°C to +40°C, max. 95%
Standards & directives Directives: 2004/108/EG, 2006/95/EG, 1999/5/EC R&TTE, 2011/65/EU | European standards: EN 61851-1, EN 61851-22, EN 62196-1, EN 62196-2, EN 61439-1, E DIN EN 61439-7, EN 61000-6-1, EN 61000-6-3, EN 50581:2012 (RoHS-RL) RFID: EN 301 489-1, EN 301 489-3, EN

What should you keep in mind before installing a charging station

KEBA chargers KeContact with up to 22 kW power require corresponding power being supplied at the place of instalment. Please be aware, that some additional setup might be needed.

All KeContact P30 series are equipped with DC fault current sensors, which not only reduces further costs of instalment expensive B-type RCD, but also saves from shock or grid failure risks.

When deciding on placing of a charging point make sure it is sutable for connecting of EVs with available cables. Station has to be located in such way, not to make a barrier while charging.

Quick overview of requirements for instalation of charging stations

The charging station is set to 10 amps in the delivery state. Set the maximum current using the DIP switches to match the installed line circuit breaker. Minimum cross-section (depending on the cable and the laying system): 5 x 2.5 mm2 (16 A nominal current); 5 x 6.0 mm2 (32 A nominal current)

Every charging station must be connected via its own RCD. No other circuits may be connected to this RCD.

Installation, commissioning and maintenance of the charging station must be performed by correctly trained, qualified and authorized electricians who are fully responsible for the compliance with existing standards and installation regulations.

We offer turn-key installation of charging stations.

Installation costs differ, depending on the way of mounting, distance from grid, the need for cabling, power of connection.

Installation and commissioning of the wallbox KeContact P20 / P30